TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 328 of 933

TM 9-2520-270-34

31. INSTALL DIPSTICK TUBE

ASSEMBLY (1) AND DIPSTICK (2).

a. Feed dipstick tube assembly (1)

through hole (3). Place lower end (4)

of dipstick tube in hole (5).

b. Install dipstick (2).

c. Position flat side of clamp (6) away

from main housing and install screw (7).

34. SECURE HOSE ASSEMBLY (9).

a. Position two clamps (10).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, install two new screws (11).

35. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/32-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE TWO SCREWS (11) TO

35-45 in-lb (40-52 cmkg).

4-30

32.

33.

USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 7/16-lNCH SOCKET,

TORQUE SCREW (7) TO 110-120 in-lb

(127-138 cmkg).

INSTALL LOCKWIRE (8).

a. Using wire-twister pliers, install

Iockwire (8) through screw (7) and

around dipstick tube assembly (1) and

clamp (6).

36. USING WIRE-TWISTER PLIERS,

INSTALL TWO NEW LOCKWIRES (12)

IN SCREWS (11) AND AROUND

CLAMPS (10).