TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 335 of 933

TM 9-2520-270-34

REPLACE PLUGS 11627748-21, 11627748-23, (3) 11627748-27, 11627748-28,

AND 11627748-29 ON RIGHT-HAND SIDE OF TRANSMISSION HOUSING

DESCRIPTIO N

This subtask covers: Remove (page 4-37). Install (page 4-38).

1. REMOVE PLUG 11627748-23 (1).

a. Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attach-

ment, remove plug (1).

b. Remove and discard preformed

packing (2).

2. REMOVE PLUG 11627748-21 (3).

a. Using 3/8-inch drive ratchet handle

and 1/8-inch socket wrench attach-

ment, remove plug (3).

b. Remove and discard preformed

packing (4).

3. REMOVE THREE PLUGS 11627748-27 (5).

a. Using 3/8-inch drive ratchet handle

and 3/8-inch socket wrench attach-

ment, remove three plugs (5).

b. Remove and discard three preformed

packings (6).

4. REMOVE PLUG 11627748-28 (7).

a. Using 9/16-inch socket wrench attach-

ment, remove plug (7).

b. Remove and discard preformed

packing (8).

5. REMOVE PLUG 11627748-29 (9).

a. Using 5/8-inch socket wrench

attachment, remove plug (9).

b. Remove and discard preformed

packing (10).

GO TO NEXT PAGE

Change 1

43 7