TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 327 of 933

TM 9-2520-270-34

25

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing in the front of this

manual.

CLEAN BRAKE PADS (1) AND

MATING SURFACES OF SECOND

RANGE BRAKE ASSEMBLIES (2)

AND (3) AND SINGLE DISK

BRAKES (4) AND (5).

a. Use wiping rag dampened with

cleaning solvent.

28. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-INCH CROWFOOT,

TORQUE ADAPTER (8) TO 125-135 in-lb

(144-155 cmkg).

29. INSTALL HOSE ASSEMBLY (9).

a. Connect swivel nut (10) to adapter (8).

29.1 USING OPEN-END WRENCH,

HOLD HOSE NUT (11).

30. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVEL NUT (10)

TO 125-135 in-lb (144-155 cmkg).

26. INSTALL BRAKE ASSEMBLIES (2)

AND (3).

a. Coat brake pads (1) with transmission

oil.

b. Coat threads of 10 self-locking

bolts (6) with sealant compound.

c. Install 10 washers (7) and bolts (6).

27. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE 10 BOLTS (6)

TO 150-160 ft-lb (21-22 mkg).

GO TO NEXT PAGE

Change 3

4-29