TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 322 of 933

TM 9-2520-270-34

34. SECURE CLAMP (1) ON HOUSING (2).

a. Position clamp (1), on hose

assembly (3).

b. Position clamp (1) against housing (2).

Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, install new short screw (4)

through clamp and housing.

WRENCH AND 5/32-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

BOLT (6) AND SCREW (4) TO

35-45 in-lb (40-52 cmkg).

37. USING WIRE-TWISTER PLIERS, INSTALL

LOCKWIRE (8) THROUGH BOLT (6)

AND AROUND HOSE ASSEMBLY (3).

REPEAT FOR SCREW (4).

35. SECURE CLAMP (5) ON HOUSING (2).

a. Install clamp (5) on hose assembly (3).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, install new long bolt (6)

through clamp (5), spacer (7), and

housing (2).

38. CONNECT HOSE ASSEMBLY (9) TO

VALVE ASSEMBLY (10).

38.1 USING OPEN-END WRENCH, HOLD

HOSE NUT (11).

39. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/164NCH CROWFOOT,

TORQUE SWIVEL NUT (12) TO

125-135 in-lb (144-155 cmkg).

4-24

Change 3

36.

Using 3/8-INCH DRIVE TORQUE