TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 321 of 933

TM 9-2520-270-34

27. SECURE TWO HOSE ASSEMBLIES (1)

AND (2).

a.

b.

Install two clamps (3) and spacer (4).

Using 3/8-inch drive ratchet handle,

6-inch extension, and 5/32-inch

socket wrench attachment, install

new screw (5) through clamp (3),

spacer (4), and second clamp (3).

28. USING 3/8-lNCH DRIVE TORQUE

WRENCH, 6-INCH EXTENSION, AND

5/32-lNCH SOCKET WRENCH

ATTACHMENT, TORQUE SCREW (5)

TO 35-45 in-lb (40-52 cmkg).

a. Coat new preformed packing (8) with

transmission oil. Install on adapter (7).

b. Screw adapter (7) into accumulator (9).

31. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/8-lNCH CROWFOOT,

TORQUE ADAPTER (7) TO

125-135 in-lb (144-155 cmkg).

29. INSTALL LOCKWIRE (6).

a. Using wire-twister pliers, install lock-

wire (6) through screw (5), around

hose assembly (1), and clamp (3).

32. CONNECT HOSE ASSEMBLY (2) TO

ADAPTER ON HYDRAULIC

ACCUMULATOR (9).

32.1 USING OPEN-END WRENCH HOLD

HOSE NUT (10).

33. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVEL NUT (11) TO

125-135 in-lb (144-155 cmkg).

GO TO NEXT PAGE

Change 3

4-23