TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 312 of 933

TM 9-2520-270-34

STEPS 5 THROUGH 7 DELETED.

11. POSITION CLAMP (3). USING 3/8-lNCH

DRIVE RATCHET HANDLE AND 5/32-lNCH

SOCKET WRENCH ATTACHMENT,

INSTALL NEW SCREW (4).

12. USING 3/8-INCH DRIVE TORQUE

WRENCH AND 5/32-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

SCREW (4) TO 35-45 in-lb (40-52 cmkg).

8.

9.

USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE ADAPTER (1) TO 125-135 in-lb

(144-155 cmkg).

CONNECT SWIVEL NUT (2) TO

ADAPTER (1).

10. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVEL NUT (2) TO

125-135 in-lb (144-155 cmkg).

13. USING WIRE-TWISTER PLIERS, INSTALL

NEW LOCKWIRE (5) IN SCREW (4) AND

AROUND CLAMP (3).

14. INSTALL CONTROLLER ASSEMBLY. See

task REPLACE CONTROLLER ASSEMBLY,

page 3-32.

END OF SUBTASK

4-16

Change 3