TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 313 of 933

TM 9-2520-270-34

REPLACE HOSE ASSEMBLY 11629168-7

DESCRIPTION

This subtask covers: Remove (page 4-17). Install (page 4-17).

1. REMOVE CONTROLLER ASSEMBLY. See

task REPLACE CONTROLLER ASSEMBLY,

2.

page 3-32.

DISCONNECT HOSE ASSEMBLY (1)

FROM ELBOW (2) ON RIGHT-HAND

HYDRAULIC ASSEMBLY (3).

3. REMOVE HOSE ASSEMBLY

11629168-7 (4).

a.

b.

c.

Using wire-twister pliers, remove

Iockwire (5). Discard Iockwire.

Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attachment,

remove screw (6) and loop clamp (7).

Discard screw.

Disconnect and remove hose

assembly (4).

4. REMOVE HOSE TO BOSS

ELBOW (8), ADAPTER (9), AND TWO

PREFORMED PACKINGS (10). DISCARD

PACKINGS.

5. INSTALL ELBOW (8) AND PREFORMED

PACKING (10). See task INSTALL ELBOW

(45° AND 90°), page 2-179.

GO TO NEXT PAGE

Change 3

4-17