TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 326 of 933

TM 9-2520-270-34

CAUTION

Hose must be installed with a smooth even

curve and not touch hardware. Damage to

equipment can occur.

19. POSITION BRAKE ASSEMBLY (1) AND

HOSE ASSEMBLY (2).

a. Place brake assembly (1) in

housing (3), Be sure brake assembly

sits flat in housing.

b. Position hose assembly (2).

c. Go to step 20.

23. INSTALL SINGLE DISK BRAKE (1).

a. Coat brake pads (5) with transmission

oil.

4-28

Change 3

20. REMOVE BRAKE ASSEMBLY (1).

21. TORQUE ELBOW (4) AND HOSE

ASSEMBLY (2) IN POSITION INDICATED

IN STEP 19. See task INSTALL ELBOW

(45° AND 90°), page 2-179.

WARNING

Solvent fumes can burn and

could poison you. Read

warning in the front of this

manual.

22. CLEAN BRAKE PADS (5) AND MATING

SURFACE OF SINGLE DISK BRAKE (1)

AND TRANSMISSION HOUSING (3).

a. Use wiping rag dampened with cleaning

solvent.

24. INSTALL RING GEAR (6).