TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 334 of 933

TM 9-2520-270-34

5. INSTALL PLUG (1).

a. Coat new preformed packing (2) with

transmission oil. Install on plug (1).

b. Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attach-

ment, install plug (1).

6. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 3/16-INCH SOCKET

WRENCH ATTACHMENT, TORQUE

PLUG (1) TO 110-120 in-lb

(127-138 cmkg).

9. INSTALL TWO PLUGS (5).

a.

b.

Coat two new preformed packings (6)

with transmission oil. Install on

plugs (5).

Using 3/8-inch drive ratchet handle

and 3/8-inch socket wrench attach-

ment, install two plugs (5).

10. USING 1/2-lNCH DRIVE TORQUE

WRENCH, ADAPTER, AND 3/8-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE TWO PLUGS (5) TO

30-35 ft-lb (4-5 mkg).

7.

8.

INSTALL PLUG (3).

a. Coat new preformed packing (4) with

transmission oil. Install on plug (3).

b. Using 3/8-inch drive ratchet handle

and 1/4-inch socket wrench attach-

ment, install plug (3).

USING 1/2-lNCH DRIVE TORQUE

WRENCH, ADAPTER, AND 1/4-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE PLUG (3) TO 20-25 ft-lb (3 mkg).

11. INSTALL PLUG (7), IF REMOVED.

a. Coat new preformed packing (8) with

transmission oil. Install on plug (7).

b. Using 5/8-inch socket wrench attach-

ment, install plug (7).

12. USING 1/2-lNCH DRIVE TORQUE

WRENCH AND 5/8-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

PLUG (7) TO 100-110 ft-lb (14-15 mkg).

END OF SUBTASK

4-36

Change 1