TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 338 of 933

TM 9-2520-270-34

INSTALL

3. INSTALL PLUG (3).

a. Coat new preformed packing (4) with

transmission oil. Install on plug (3).

b. Using 3/8-inch drive ratchet handle

and 1/8-inch socket wrench attach-

ment, install plug (3).

4. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 1/8-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

PLUG (3) TO 50-60 in-lb (58-69 cmkg).

2. REMOVE PLUG 11627748-28 (1).

a. Using 9/16-inch socket wrench attach-

ment, remove plug (1).

b. Remove and discard preformed

packing (2).

5. INSTALL PLUG (1).

a. Coat new preformed packing (2) with

transmission oil. Install on plug (1).

b. Using 9/16-inch socket wrench attach-

ment, install plug (1).

6. USING 1/2-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

PLUG (1) TO 65-75 ft-lb

(9-10 mkg).

END OF SUBTASK

4-40