TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 347 of 933

TM 9-2520-270-34

CAUTION

Support spur gear when removing input idler

spindle. Damage to equipment can occur.

19. REMOVE INPUT IDLER SPINDLE (1),

SPUR GEAR (2), AND TWO THRUST

WASHERS (3).

a. Using plastic-faced hammer, tap

spindle (1) out right side of main

housing (4).

b. Remove gear (2) and two thrust

washers (3).

20. INSPECT SPINDLE (1).

a.

Inspect spindle (1) for damage. See

page 2-5.

b. Replace spindle (1) if damaged.

21. INSPECT GEAR (2).

a.

Inspect gear (2) for damage. See

page 2-5.

b. If gear (2) is not damaged, go to

step 22. If gear is damaged, go to

step 23.

GO TO NEXT PAGE

4-47