TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984
TM-9-2520-270-34

  TM-9-2520-270-34 - Page 356 of 933

TM 9-2520-270-34
18. POSITION TRANSMISSION (1).
a. Tilt transmission (1) up slightly.
20. INSTALL TWO SPACERS (6).
a. Place two spacers (6) in line with
screw holes (4) at bottom of
disconnect clutch assembly (5).
19. INSTALL FIRST CLUTCH PLATE (2).
a. Coat first clutch plate (2) with
transmission oil .
b. Aline notches (3) in clutch plate (2)
with screw holes (4) in disconnect
clutch assembly (5). Install clutch
plate.
21. INSTALL FIRST FRICTION
CLUTCH PLATE (7).
a.
b.
Coat first friction clutch plate (7)
with transmission oil.
Aline teeth on friction clutch plate (7)
with teeth on clutch plate hub (8).
Install friction clutch plate.
4-56


Back to Top