TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 357 of 933

TM 9-2520-270-34

22. INSTALL SECOND CLUTCH PLATE (1)

AND SECOND FRICTION CLUTCH

PLATE (2).

a. Coat second clutch plate (1) with

transmission oil .

b. Aline tangs (3) of second clutch

plate (1) with low spots (4) of first

clutch plate. Install second clutch

plate.

c. Coat second friction clutch plate (2)

with transmission oil.

d. Aline teeth on second friction clutch

plate (2) with teeth on hub (5). Install

second friction clutch plate.

23. INSTALL THIRD CLUTCH PLATE (1).

a.

b.

Coat third clutch plate (1) with

transmission oil.

Aline tangs (3) of third clutch

plate (1) with tangs of second clutch

plate. Install third clutch plate.

24. INSTALL TEN SPACERS (6).

a. Put ten spacers (6) in place.

Press in until they bottom.

GO TO NEXT PAGE

4-57