TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 353 of 933

2. INSPECT PLAIN ENCASED SEAL (1).

a. Inspect seal (1) for damage. See

page 2-5.

b. If seal (1) is damaged, replace seal. See

task REPLACE ENCASED SEAL,

page 3-2. If seal (1) is not damaged go

to step

4.

a.

b.

Loosen 12 screws (6) evenly.

Remove 10 screws (6) and washers (7),

leaving one screw on top and one

screw on the bottom.

3. DELETED.

5. REMOVE PLATE ASSEMBLY (5).

a. While holding plate assembly (5),

remove last two screws (6) and

washers (7).

b. Remove plate assembly (5). Tip top of

plate assembly back when removing

to keep spring guide pins (8) and

springs (9) from falling out.

GO TO NEXT PAGE

Change

3

4-53

TM 9-2520-270-34

4.

PREPARE BACKUP PLATE

ASSEMBLY (5) FOR REMOVAL.

NOTE

Backup plate assembly contains small parts

which can easily become lost.