TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 364 of 933
TM 9-2520-270-34
11. INSTALL COVER (1).
a. Position cover (1) over priority valve
cover (2).
b. Using 3/8-inch drive brace handle
and 7/16-inch socket, install two
new lock washers (3) and screws (4).
12. USING 3/8-lNCH DRIVE TORQUE
WRENCH, EXTENSION, AND
7/16-lNCH SOCKET, TORQUE TWO
SCREWS (4) TO 85-95 in-lb
(98-109cmkg).
END OF TASK
4-64
Back to Top
