TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 369 of 933

TM 9-2520-270-34

NOTE

Transmission is rotated 45 degrees to prevent

contents of sump cover from spilling into

transmission.

15. POSITION TRANSMISSION (1).

a. Rotate transmission (1) so top is at

a forty-five degree angle.

18 USING MEASURING DEVICE,

CHECK INSIDE OF SUMP COVER (4)

FOR METAL CHIPS.

a. Note contamination if there is more

than 1/2 tsp (2 cc) of metal chips.

IF CONTAMINATION WAS NOTED IN

STEPS 1, 8, OR 18, GO TO STEP 20.

IF NOT, EFFORT IS COMPLETE. GO

TO END OF TASK

16. REMOVE 17 BOLTS (2).

a. Remove 17 bolts (2) and lock

washers (3). Discard lock washers.

17. REMOVE SUMP COVER (4).

a. Remove cover (4) and gasket (5).

Discard gasket.

20. REMOVE PLUG (6) AND GASKET (7).

DISCARD GASKET.

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing in the front of this

manual.

21. CLEAN PLUG (6) AND INSIDE OF

SUMP COVER (4).

a. Use wiping rag dampened with

cleaning solvent.

GO TO NEXT PAGE

Change 3

4-69 (4-70 blank)

19.