TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 377 of 933

TM 9-2520-270-34

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing In the front of this

manual.

52. CLEAN COVER ASSEMBLY (1).

a. Use wiping rag dampened with

cleaning solvent.

53. INSTALL COVER ASSEMBLY (1).

a. Put new gasket (2) in place on

mounting surface (3) and aline with

screw holes.

b. Aline cover assembly (1) with

gasket (2). Press assembly in place.

54. INSTALL 10 NEW LOCK WASHERS (4)

AND SCREWS (5).

55. USING 1/2-lNCH DRIVE TORQUE

WRENCH, EVENLY TORQUE

10 SCREWS (5) to 30-35 ft-lb

(4-5 mkg).

56. RESET PRESSURE INDICATOR (6).

a. Press button (7) on indicator (6).

END OF TASK

Change

3

4-76.1