TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 375 of 933

TM 9252Cb27M4

43. INSTALL PLUG

(l), IF REMOVED.

a. install new gasket (2) on plug (1).

b. Apply sealant compound to threads of

plug

(1).

c. Install plug (1) in sump cover (3).

44. USING l/2-INCH DRIVE TORQUE

WRENCH, TORQUE PLUG (1) TO

55-60 ft-lbs (8 mkg).

d

6

45. POSITION TRANSMISSION (4).

“:

a. Rotate transmission (4) so oil filter

i

cavity (5) is on top.

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing in the front of this

manual.

47. INSTALL NEW ELEMENT (7).

a. Coat preformed packing (8) on.each

end of new element (7) and spmdle (9)

with clean transmission oil.

46. CLEAN MOUNTING SURFACE (6)

AND CAVITY (5).

a. Use wiping rag dampened with

cleaning solvent.

GO TO NEXT PAGE

b. Put element (7) on spindle (9) and

push it down into cavity (5) until

firmly seated.

475