TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 372 of 933

25.

26.

REMOVE FLUID FILTER ELEMENT (1).

a. Pull element (1) from cap (2) or

cavity (3).

REMOVE AND DISCARD TWO

PREFORMED PACKINGS (4) AND

HYDRAULIC O-RING (5).

28. INSTALL PRESSURE FLUID FILTER (7).

See task, REPLACE PRESSURE FLUID

FILTER, page 342.

29. INSTALL CONTROLLER FLUID FILTER

CAP (2) .

a. Push cap (2) into controller (8).

b. Aline screw holes (9).

c. Tap and seat cap

( 2 )

into place.

d. Install four screws (10).

27. INSPECT CAVITIES (6) AND (3).

a. If metal chips are found in either

cavity (6) or (3), go to step 28.

If not, go to step 33.

4-72

Change 3

TM 9-2520-270-34

NOTE

Filter element may be found either on cap or

in

cavity.