TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 374 of 933

TM 9-2520-270-34

37. INSTALL FOUR NEW LOCK

WASHERS (1) and SCREWS (2).

38. USING 3/8-INCH DRIVE TORQUE

WRENCH AND 7/16-lNCH SOCKET,

TORQUE FOUR SCREWS (2) TO

85-110 in-lb (98-127 cmkg).

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing in the front of this

manual.

40. CLEAN MATING SURFACES (5).

AND INSIDE OF SUMP COVER (6)

a. Use wiping rag dampened with

cleaning solvent.

41. INSTALL SUMP COVER (6).

a. Position new gasket (7) and sump

cover (6) on housing.

b. Install 17 new lock washers (8)

and bolts (9).

42. USING 1/2-INCH DRIVE TORQUE

WRENCH, TORQUE 17 BOLTS (9) TO

15-20 ft-lb (2-3 mkg).

4-74

Change 1

39. POSITION TRANSMISSION (3).

a. Rotate transmission (3) so sump

opening (4) is on top.