TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 376 of 933

TM 9-2520-270-34

CAUTION

Flexible cover must be in position on

pressure indicator at all times. Damage

to equipment can occur.

48. INSPECT PRESSURE INDICATOR (1).

a. If flexible cover (2) is not

on indicator (1), go to step 49.

b. If flexible cover (2) is on

indicator (1), go to step 52.

50. INSTALL NEW PRESSURE

INDICATOR (1).

a. Coat new preformed packings (3)

and (4) with transmission oil.

b. Install preformed packings (3)

and (4) on indicator (1).

c. Install new indicator (1) in cover (5).

d. (H) Hold cover (5) on workbench.

51. USING 1/2-INCH DRIVE TORQUE

WRENCH, TORQUE INDICATOR (1)

TO 20-25 ft-lb (3 mkg).

49. REMOVE PRESSURE INDICATOR (1).

a. Unscrew indicator (1).

b. Remove and discard preformed

packings (3) and (4).

4-76

Change

2