TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 341 of 933

2. REMOVE PLUG 11627748-25 (1).

a. Using 3/8-inch drive ratchet handle

and 1/4-inch socket wrench attach-

ment, remove plug (1).

b. Remove and discard preformed

packing (2).

3. REMOVE PLUG 11627748-28 (3).

a. Using 9/16-inch socket wrench

attachment, remove plug (3).

b. Remove and discard preformed

packing (4).

5.

6.

INSTALL TWO PLUGS (7).

a. Coat two new preformed packings (8)

with transmission oil. Install on

plugs (7).

b. Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attach-

ment, install two plugs (7).

USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 3/16-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

TWO PLUGS (7) TO 110-120 in-lb

(127-138 cmkg).

4. REMOVE TWO PLUGS

11627748-23 (5).

a. Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attach-

ment, remove two plugs (5).

b. Remove and discard two preformed

packings (6).

GO TO NEXT PAGE

Change 1

TM 9-2520-270-34

4-43