TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 340 of 933

TM 9-2520-270-34

5.

6.

INSTALL TWO PLUGS (1).

a. Coat two new preformed packings (2)

with transmission oil. Install on

plugs (1).

b. Using 3/8-inch socket wrench

attachment, install two plugs (1).

USING 1/2-lNCH DRIVE TORQUE

WRENCH, ADAPTER, AND 3/8-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE TWO PLUGS (1) TO

30-35 ft-lb (4-5 mkg).

END OF SUBTASK

REPLACE PLUGS (5) 11627748-23, 11627748-25, 11627748-28, AND

MS 51840-23 ON TOP OF TRANSMISSION HOUSING

DESCRIPTION

This subtask covers: Remove (page 4-42). Install (page 4-43).

1. REMOVE TWO PLUGS 11627748-23 (3).

Using 3/8-inch drive ratchet handle

and 3/16-inch socket wrench attach-

ment, remove two plugs (3).

Remove and discard two preformed

packings (4)

1.1 REMOVE PLUG MS 51840-23 (5).

a. Using 3/8-inch drive ratchet handle

and 9/16-inch socket, remove

plug (5).

b. Remove and discard preformed

packing (4).

4-42

Change 1