TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 324 of 933

TM 9-2520-270-34

10. RELEASE HOSE ASSEMBLY

11629168-5 (1).

a.

b.

c.

Using wire-twister pliers, remove

two Iockwires (2), Discard Iockwires.

Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, remove two screws (3). Discard

screws.

Remove two loop clamps (4).

12. DISCONNECT HOSE ASSEMBLY (1).

a. Using 3/8-inch drive ratchet handle and

9/16-inch crowfoot, disconnect swivel

nut (10).

11. REMOVE DIPSTICK (5) AND

DIPSTICK TUBE ASSEMBLY (6).

a.

b.

c.

Using wire-twister pliers, remove

and discard Iockwire (7).

Using 3/8-inch drive ratchet handle

and 7/16-inch socket, remove

screw (8).

Remove dipstick (5) and dipstick tube

assembly (6) with clamp (9).

13. REMOVE TWO SECOND RANGE

BRAKE ASSEMBLIES (11).

a. Remove 10 self-locking bolts (12)

and washers (13).

b. Remove two brake assemblies (11).

4-26