TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 300 of 933

6. REMOVE HOSE ASSEMBLY

11628453-6 (1).

a. Disconnect nut (2) from adapter (3).

b. Disconnect nut (4) from hose to boss

elbow (5).

c. Remove screw (6) and hose

assembly (l).

7. REMOVE ELBOW (5), ADAPTER (3),

AND TWO PREFORMED PACKINGS (7).

DISCARD PACKINGS.

8. INSTALL ADAPTER (3).

a. Coat new preformed packing (7) with

transmission oil, Install on adapter (3).

b. Screw adapter (3) into housing.

9. USING 3/8-lNCH TORQUE WRENCH

AND 9/16-lNCH CROWFOOT, TORQUE

ADAPTER (3) TO 125-135 in-lb

(144-155 cmkg).

4-4

Change 3

10. INSTALL ELBOW ( 5 ) AND PREFORMED

PACKING (7). See task INSTALL ELBOW

(45° and 90°), page 2-179.

TM 9-2520-270-34