TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 285 of 933
TM 9-2520-270-34
33. INSTALL CAP (1) WITH ELEMENT (2).
a.
b.
c.
d.
Remove rag from hole (3).
Push cap (1) with element (2) into
hole (3) in controller assembly.
Aline four screw holes (4) in cap (1)
with four screw holes (5) in controller
assembly.
Using plastic-faced hammer, tap and
seat cap (1) into place.
34.
35.
INSTALL FOUR NEW LOCK
WASHERS (6) AND SCREWS (7).
USING 3/8-lNCH DRIVE TORQUE
WRENCH AND 7/16-lNCH SOCKET,
TORQUE FOUR SCREWS (7) TO
85-110 in-lb (98-127 cmkg).
END OF TASK
Change 1
3-41
Back to Top
