TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 475 of 933

TM 9-2520-270-34

59. WORKING ON RIGHT SIDE OF HOUS-

ING (2), INSTALL THREE PLUGS (1).

a. Using 3/8-inch hex key, install

three plugs (1) in housing (2).

WARNING

Water under pressure can

injure you and others. Stand

clear of housing. Always wear

goggles.

61. FLUSH HOUSING (2) WITH CLEAN

WATER AT 40-100 psi (263.8-659.5 kPa)

AND 200 gpm (757 Ipm) FOR

FIVE MINUTES.

62. INSTALL PRIORITY VALVE OPENING

COVER (4) IN TOP OF HOUSING (2).

a. Place cover (4) on housing (2).

b. Install two screws (5).

c. Hand tighten screws (5).

60. INSTALL TWO PLUGS (3).

a. Using 3/16-inch hex key, install

two plugs (3).

GO TO NEXT PAGE

4-161