TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 472 of 933

TM 9-2520-270-34

WARNING

Water under pressure can

injure you and others. Stand

clear of housing. Always wear

goggles.

NOTE

The main housing will require five flushings.

Make sure all are performed.

44.

45.

FLUSH HOUSING (1) WITH CLEAN

WATER AT 40-100 psi (263.8-659.5 kPa)

AND 200 gpm (757 Ipm) FOR

FIVE MINUTES.

WORKING ON FRONT OF

HOUSING (1), INSTALL MAKE-UP

PUMP OUTLET COVER (2).

a. Place cover (2) on housing (1).

b. Install two screws (3).

c. Hand tighten screws (3).

46.

47.

WARNING

Water under pressure can

injure you and others. Stand

clear of housing. Always wear

goggles.

FLUSH HOUSING (1) WITH CLEAN

WATER AT 40-100 psi (263.8-659.5 kPa)

AND 200 gpm (757 Ipm) FOR

FIVE MINUTES.

WORKING ON BOTTOM OF

HOUSING (1), INSTALL REGULATOR

COVER (4)

a.

b.

c.

Place cover (4) in housing

Install two screws (5).

Hand tighten screws (5).

(1).

4-158