TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 480 of 933

TM 9-2520-270-34

81. REMOVE COVER (1).

a. Remove two screws (2)

b. Remove cover (1).

82. ROTATE HOUSING (3) ON TIP-OVER

STAND TO DRAIN WATER FROM

PORTS AND CAVITIES.

85. INSPECT HOUSING (3) FOR

SCRATCHES ON FINISHED SUR-

FACES OR CRACKS IN HOUSING.

REPLACE HOUSING IF DAMAGED.

86. INSPECT ALL MAIN HOUSING

INSERTS. See page 2-5.

a. Repair inserts if damaged. See

task REPAIR MAIN HOUSING

INSERTS, page 4-150.

84

WARNING

Compressed air can injure

you and others. Do not aim air

at soldiers. Do not use more

pressure than 20 psi (207 kPa).

Always wear goggles.

USING FILTERED LOW PRESSURE

AIR, BLOW WATER OUT OF ALL

SCREW HOLES, OIL PORTS, AND

HOUSING CAVITIES,

IF GEAR (4) IS INSTALLED,

LUBRICATE ROLLER BEARINGS (5)

WITH TRANSMISSION OIL TO

REMOVE ANY WATER.

87. IF GEAR (4) WAS REMOVED,

INSTALL GEAR. See task REPLACE

INPUT IDLER SPUR GEAR ASSEMBLY,

page 4-45.

4-166

83.