TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 487 of 933

TM 9-2520-270-34

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

CAUTION

Hose assembly must be fed through opening

while lifting housing assembly to prevent

damage to hose assembly.

10. EVENLY LIFT OFF

HOUSING ASSEMBLY (1).

a. Use pry slot (2) to loosen housing

assembly (1).

b. Helper feed hose assembly (3)

through opening (4). Repairer lift

housing 1/4 inch (6 mm) at a time.

Check that cross shaft (5) is not stuck

in spur gear (6).

c. Place housing assembly (1) on

workbench.

11. REMOVE AND DISCARD RIGHT-

HAND MAIN HOUSING GASKET (7).

12. REMOVE LIFTING DEVICE (8)

AND TWO EYEBOLTS (9).

GO TO NEXT PAGE

4-173