TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 492 of 933

TM 9-2520-270-34

CAUTION

All parts must mate. Do not allow kinking or

bending of hose assembly. Equipment can be

damaged.

34. PARTIALLY LOWER HOUSING

ASSEMBLY (1) TO ALINE

COMPONENTS AND HOSE.

a.

b.

c.

d.

e.

(H) Feed hose (2) through hole (3).

Hold hose while lowering housing

assembly (1).

Aline shaft (4) with splined hole (5).

Aline clutch pIate tangs (6) with

slots in clutch housing (7).

Aline tow pump spur gear (8) with spur

gear (9).

Aline two pins (10) with pilot

holes

(11) .

35. LOWER HOUSING ASS

EMBLY

(1) To

WITHIN 1/4-INCH OF BEING

FULLY SEATED.

a. (H) Hold hose (2) while lowering

housing assembly (1).

b. Aline all parts of housing assembly (1).

c. (H) Look through top opening (12) and

check that clutch plate tangs (6) are

alined with clutch housing slots (7).

4-178