TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 488 of 933

17. CHECK CLEARANCE (4) OF

CLUTCH DISK (3).

a.

b.

0.021-0.060 inch (0.53-1.52 mm),

go to step 18. If all clearancess are

0.021-0.060 inch (0.53-1.52 mm),

go to step 19.

18. REPLACE RIGHT-HAND SINGLE

DISK BRAKE

See page 4-197.

15. INSPECT CLUTCH DISK (3)

FOR DAMAGE

.See

page

2-5.

a. If surface is damaged, go to step 16.

If not. go to step 17.

16. REPLACE RIGHT-HAND SINGLE

DISK BRAKE. See page 4-197.

TM 9-2520-270-34

13. REMOVE SPUR GEAR (1) AN D

THRUST WASHER BEARING (2) .

14. INSPECT MAIN HOUSING INSERTS.

See

page

2-5

.

a.

Repair inserts if damaged.

See

task REPAIR MAIN HOUSING

INSERTS, page 4-150.

Measure clearance (4) between clutch

disk (3) and four brake pads (5).

If any clearance (4) is not

4-174