TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 494 of 933

TM 9-2520-270-34

CAUTION

Kinks or bends In hose assembly can cause

damage to equipment. Hose assembly must

be routed in same way as In removal. Hose

must be clear of sharp or moving objects.

Hose assembly can be damaged.

40. INSTALL HOSE ASSEMBLY (1). See task

INSTALL ELBOW (45° AND 90°),

page 2-179.

a. Install three clamps (2) and three new

screws (3).

b. Position hose assembly (1).

41. DELETED.

42. DELETED.

43. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/32-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE THREE

SCREWS (3) TO 35-45 in-lb (40-52 cmkg).

44. USING WIRE-TWISTER PLIERS, INSTALL

THREE NEW LOCKWIRES (4) IN

SCREWS (3) AND AROUND CLAMPS (2).

4-180

Change 3