TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 486 of 933

TM 9-2520-270-34

NOTE

Observe how the hose assembly is routed. It

must be put back the same way.

6. RELEASE HOSE ASSEMBLY (1)

FROM RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY (2).

a. Using wire-twister pliers, remove

and discard lockwire (3) from three

screws (4) and clamps (5).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, remove three screws (4) and

clamps (5). Discard screws.

8. INSTALL TWO EYEBOLTS (8) IN TWO

THREADED HOLES (9).

9. ATTACH AND SECURE LIFTING

DEVICE (10) TO TWO EYEBOLTS (8).

7. REMOVE THREE SCREWS (6) FROM

HOUSING ASSEMBLY (2).

a. Remove three screws (6) and lock

washers (7). Discard lock washers.

4-172