TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 485 of 933
TM 9-2520-270-34
4. REMOVE RETAINING RING (1).
a. (H) Reach in through controller
opening (2) and pry up cross shaft (3).
b. Using retaining-ring pliers, remove
retaining ring (1).
4-171
WARNING
Use care when removing
retaining ring. Retaining ring
can fly. Personnel can be
injured. Always wear goggles.
5.
DISCONNECT HOSE ASSEMBLY NUT (4)
FROM HOSE TO BOSS ELBOW(5).
GO TO NEXT PAGE
Back to Top
