TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 476 of 933

TM 9-2520-270-34

63. INSTALL PLUG (1).

a. Using 9/16-inch hex key, install

plug (1) in housing (2).

64. WORKING ON RIGHT SIDE OF

HOUSING (2), INSTALL PLUG (3).

a. Using 9/16-inch hex key, install

plug (3) in housing (2).

65. WORKING ON BOTTOM OF HOUS-

ING (2), INSTALL TWO PLUGS (4).

a. Using 9/16-inch hex key, install two

plugs (4) in housing (2).

WARNING

Water under pressure can

injure you and others. Stand

clear of housing. Always wear

goggles.

66. FLUSH HOUSING (2) WITH CLEAN

WATER AT 40-100 psi (263.8-659.5 kPa)

AND 200 gpm (757 Ipm) FOR

FIVE MINUTES.

4-162