TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 473 of 933

TM 9-2520-270-34

48. WORKING ON TOP OF HOUSING (1),

INSTALL RELIEF COOLER BY-PASS

COVER (2).

a. Using 1-inch drive ratchet handle and

1 3/4-inch socket, install cover (2)

in housing (1).

50. WORKING ON TOP OF HOUS-

ING (1), INSTALL PLUG (4).

a. Using 1-inch drive ratchet handle and

2 1/8-inch socket, install plug (4)

in housing (1).

WARNING

Water under pressure can

injure you and others. Stand

clear of housing. Always wear

goggles.

51. FLUSH HOUSING (1) WITH CLEAN

WATER AT 40-100 psi (263.8 -659.5

kPa)

AND 200 gpm (757 Ipm ) FOR

FIVE MINUTES.

49. WORKING ON RIGHT SIDE OF

HOUSING (1), INSTALL PLUG (3).

a. Using 5/8-inch hex key, install

plug (3) in housing (1).

52. REMOVE PLUG (4).

a. Using 1-inch drive ratchet handle

and 2 1/8-inch socket, remove

plug (4) from housing (1).

GO TO NEXT PAGE

Change

1

4-159