TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 815 of 933

TM 9-2520-270-34

CAUTION

Inner and outer rotors must stay a matched

set. Damage to equipment can occur.

21. INSTALL INNER ROTOR (1) ON

SHAFT (2).

a. Install new retaining ring (3).

b. Install new woodruff key (4).

c. Slide rotor (1) onto

shaft (2).

a.

b.

Aline pin (7) on plate assembly (6)

with pilot hole (8) on housing (5).

Install plate assembly (6) on

housing (5).

22. INSTALL SHAFT (2) IN

HOUSING (5).

a. Coat shaft (2) with transmission oil.

b. Install shaft (2) in housing (5).

24. ROTATE SHAFT (2) IN BOTH

DIRECTIONS TO VERIFY FREE

MOVEMENT.

a. If shaft (2) rotates freely, go

to step 25. If not, go to step 4.

GO TO NEXT PAGE

4-479

23. INSTALL PLATE ASSEMBLY (6) ON

HOUSING

(5).