TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 824 of 933

TM 9-2520-270-34
26. REMOVE SPUR GEAR (1).
CAUTION
Do not scratch, nick or mar mating surfaces
of
pump
housings.
Damage
to
equipment can
result.
NOTE
Pump elements and
housings are matched
sets.
Do not interchange housings. Do not remove
pump shafts or elements.
27. SEPARATE BOTTOM HOUSING (4)
FROM TOP HOUSING (5).
a.
b.
c.
4-488
Using 1/4-inch drive rachet handle,
extension and 7/16-inch socket,
remove five long screws (6) and
washers (7).
Remove eight short screws (8)
and washers (9).
Separate housings
(4) and (5).
a. Using screwdriver, remove retaining
ring (2). Discard ring
b. Using prybar, remove gear (1).
c. Remove and discard key (3).
d. Using screwdriver, remove second
retaining ring (2). Discard ring.


Back to Top