TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 832 of 933

TM 9-2520-270-34
WARNING
Solvent fumes can burn and
could poison you. Read warn-
ing in the front of this
manual.
64. CLEAN MATING SURFACES (1).
a. Use wiping rag dampened with
cleaning solvent.
67. INSTALL PLUG (7).
a. Install new gasket (8) on plug (7).
b. Apply sealant compound to threads
of plug (7).
c. Install plug (7) in sump cover (2).
68. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE PLUG (7) TO
55-60 ft-lbs (8 mkg).
69.
INSTALL POWER TAKEOFF ASSEMBLY.
See task REPLACE POWER TAKEOFF
ASSEMBLY, page 4-140.
70. INSTALL DISCONNECT CLUTCH
ASSEMBLY. See task REPLACE
DISCONNECT CLUTCH ASSEMBLY,
page 4-78.
71. INSTALL Disconnect CLUTCH. See
task REPLACE Disconnect CLUTCH,
page
4-52.
65. INSTALL SUMP COVER (2).
a. Position new gasket (3) and sump
cover (2) on housing (4).
b. Install 17 new lock washers (5)
and bolts (6).
66. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE 17 BOLTS (6)
TO 15-20 ft-lb (2-3 mkg).
END OF TASK
4-496


Back to Top