TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 825 of 933

TM 9-2520-270-34
28. ROTATE PUMP SHAFTS (1).
a. If shafts (1) and inner pump
elements (2) rotate, go to step 29.
b. If either shaft (1) or inner pump
element (2) does not rotate, go to
step 39.1.
30. INSPECT BOTTOM HOUSING
INSERTS (5). See page 2-5.
a. If inserts (5) are not damaged, go to
step 31.
b. If any insert (5) is damaged, go to
step 39.1.
29. INSPECT INNER SURFACES (3) OF
BOTTOM HOUSING (4) FOR GOUGING.
a. If inner surfaces (3) are not damaged,
go to step 30.
b. If either inner surface (3) is
damaged, go to step 39.1
NOTE
Pump elements are a matched
remove pump shafts or elements.
31. INSPECT TOP HOUSING
INSERTS (6). See page 2-5.
set. Do not
a. If inserts (6) are not damaged,
go to step 32.
b. If any insert (6)
go to step 39.1
GO TO NEXT PAGE
is damaged,
Change 2
4-489


Back to Top