TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 819 of 933

TM 9-2520-270-34

4.

5.

6.

POSITION TRANSMISSION

BOTTOM SIDE UP.

REMOVE PLUG (1).

a. Remove plug (1).

b. Remove gasket (2) from plug (1).

Discard gasket.

1

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing

in the front of this

manual.

CLEAN PLUG (1)

a.

Use wiping rag dampened with

cleaning solvent.

7. REMOVE SUMP COVER (3).

a. Remove 17 bolts (4) and lock

washers (5). Discard lock washers.

b. Remove cover (3) and gasket (6).

Discard gasket.

8. REMOVE AUXILIARY MAKEUP

SCREEN (7).

a. Using 3/8-inch ratchet handle with

7/16-inch socket, remove two

screws (8).

b. Pull screen (7) off.

c.

Remove preformed packing (9) from

screen (7). Discard packing.

GO TO NEXT PAGE

4-483