TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 834 of 933

TM 9-2520-270-34

3. REMOVE GEAR (1).

a. Using screwdriver, remove retaining

ring (2). Discard ring.

b. Using prybar, remove gear (1).

c. Remove and discard key (3).

4. INSPECT GEAR (1).

a. Inspect gear (1) for damage. See

page 2-5.

b. Replace gear (1) if damaged.

6. INSTALL TWO ELBOWS (4) AND TWO

PREFORMED PACKINGS (5). See task

INSTALL ELBOW (45° AND 90°),

page 2-179.

Change 3

5. REMOVE TWO HOSE TO BOSS

ELBOWS (4).

a. Remove two elbows (4) and preformed

packings (5). Discard packings.

7. INSTALL GEAR (1).

a. Install new key (3).

b. Install gear (1).

c. Install new retaining ring (2).

4-498