TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 830 of 933

TM 9-2520-270-34

52. INSTALL NEW BEARING (1) IN

SPUR GEAR (2).

a.

b.

c.

If bearing (1) was removed from

gear (2), go to step 52b. If not,

go to step 53.

Coat new bearing (1) with

transmission oil.

Using arbor press and bearing

installer, press bearing (1)

into spur gear (2). See TM 9-214.

54. INSTALL NEW TWO-PIECE

RETAINING RING (5).

a. Using slip-joint pliers, install

ring (5) with sharp edge out.

53. INSTALL SPUR GEAR (2).

a. Coat shaft (3) and bearing (1)

with transmission oil.

b. Install thrust washer bearing (4).

c. Install gear (2).

d. Install second thrust washer bearing (4).

55. CONNECT HOSE ASSEMBLY

(6).

a. Connect swivel nut ( 7 ) to hose to boss

elbow

(

8 ) . See task INSTALL ELBOW

(45° AND 90°), page 2-179.

56. DELETED.

Change 3

4-494