TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 842 of 933

TM 9-2520-270-34
REPAIR THIRD RANGE RELAY VALVE ASSEMBLY
DESCRIPTIO N
This task covers: Disassemble (page 4-506). Assemble (page 4-509).
INITIAL SETUP
Tools:
General mechanic’s tool kit:
automotive — (Item 33, App C)
Inside/outside indicator caliper —
(Item 41, App C)
Machinist’s vise – (Item 47, App C)
Micrometer caliper set – (Item 52, App C)
Retaining-ring pliers – (Item 61, App C)
Small hole gage set – (Item 72, App C)
Socket wrench adapter —
(Item 75, App C)
Socket wrench attachment —
(ltem 82, App C)
Torque wrench — (Item 100, App C)
NOTE
Two types of third range relay valve assembly
are in use. Portions of these procedures
apply
to
each
valve assembly.
1.
PLACE THIRD RANGE RELAY
VALVE ASSEMBLY IN VISE,
1.1
INSPECT VALVE ASSEMBLY AND
DETERMINE TYPE.
a. If valve assembly is type (1),
go to step 2.
b. If valve assembly is type (2),
go to step 14.1.
Materials/Parts:
Transmission oil — (Item 12, App B)
Preformed packing
Preformed packing
Retaining ring
Retaining ring
Personnel Required:
Track Veh Rep 63H10
Equipment Conditions:
Third range relay valve assembly on workbench.
See page 4-502.
4-506
Change 2


Back to Top