TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 886 of 933

TM 9-2520-270-34

NOTE

Screws securing rear transmission container

mount to container frame are torqued only

after transmission is installed in lower container.

31. INSTALL REAR TRANSMISSION

CONTAINER MOUNT (1) ON FRAME (2).

a. Position rear container mount (1)

on pin (3).

b. Install four washers (4), lock

washers (5), and screws (6) in rear

container mount (1).

c. Hand tighten screws (6).

32. INSTALL GASKET (7) ON LOWER

CONTAINER (8).

a.

b.

Position gasket (7) on lower

container (8).

Install new tape (9) on gasket (7) in

two places at each corner of lower

container (8).

33. PLACE SHIPPING BAG (10) CONTAIN-

ING 16 FLAT WASHERS, 10 SCREWS,

4 LOCK WASHERS, AND 6

SELF-LOCKING NUTS IN LOWER

CONTAINER (8).

GO TO NEXT PAGE

4-545