TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 880 of 933
10. REMOVE FOUR MOUNTS (1) FROM
CONTAINER FRAME (2).
a. Remove 16 self-locking nuts (3),
flat washers (4) and 4 mounts (1)
from container frame (2). Discard
self-locking nuts.
11. INSPECT FOUR MOUNTS (1) FOR
LOOSE BOLTS, CRACKS, TEARS, OR
OTHER SIGNS OF DAMAGE. INSPECT
MOUNT BOLTS (5) FOR THREAD
DAMAGE. See page 2-5.
a. Replace mounts (1) if damaged.
12. REPAIRER AND HELPER ATTACH
SLING (6) TO TWO LOWER
CORNERS (7) OF LOWER
CONTAINER (8).
a. (H) Using lifting device (9), lower
sling (6) to reach lower corners (7) of
lower container (8).
b. Attach two legs of sling (6) to two
lower corners (7) of lower
container (8).
GO TO NEXT PAGE
4-539
TM 9-2520-270-34
Back to Top
