TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

  TM-9-2520-270-34 - Page 873 of 933

ASSEMBLE
WARNING
Solvent fumes can burn and
could poison you. Read warn-
ing in the front of this
manual.
16. CLEAN IDENTIFICATION MARKER
MATING SURFACE (1) ON UPPER
CONTAINER (2) IF IDENTIFICATION
MARKER WAS REMOVED.
a. Use wiping rag dampened with
cleaning solvent.
b. Dry identification marker mating
surface (1) with dry wiping rag.
17. INSTALL NEW IDENTIFICATION
MARKER (3) ON UPPER
CONTAINER (2), IF REMOVED.
a.
b.
c.
Remove backing (4) from identi-
fication marker (3).
Press identification marker (3)
firmly on identification marker
mating surface (1) on upper con-
tainer (2).
Rub out air bubbles.
4-532
TM 9-2520-270-34


Back to Top