TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 874 of 933

TM 9-2520-270-34

18.

19.

INSTALL NEW PLATE (1) ON UPPER

CONTAINER (2) IF REMOVED.

a. Install plate (1) and four new drive

screws (3) on upper container (2).

WELD UPPER CONTAINER (2)

AS NECESSARY. METAL DESIGNATOR

IS MIL-S-1261, CLASS I. TM 9-237.

20. REPAIRER AND HELPER INSTALL

COLLAR (4) ON UPPER

CONTAINER (2).

a. (H) Using spanner wrench, hol d

nut (5)and washer (6) on inside of

uppper container (2).

b.

Place new packing (7) on collar (4)

and thread into nut (5) throug h

dessicant port (8).

c. Using second spanner wrench,

tighten collar (4).

GO TO NEXT PAGE

4-533