TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 883 of 933

TM 9-2520-270-34

21.

22.

REMOVE SLING (1) FROM LIFTING

DEVICE (2) AND CORNERS OF

LOWER CONTAINER (3).

WELD LOWER CONTAINER (3), AS

NECESSARY. METAL DESIGNATOR

IS MlL-S-1261, CLASS I. See TM 9-237.

25. REPAIRER AND HELPER ATTACH

LIFTING SLING (1) TO CONTAINER

FRAME (5).

a. (H) Lower lifting device (2) with

sling (1) to reach container frame (5).

b. Attach each leg of sling (1) to a corner

of the container frame (5).

c. Adjust length of turnbuckle legs (9),

if necessary.

23.

24.

INSTALL FOUR MOUNTS (4) ON

CONTAINER FRAME (5).

a. Install mount (4), four washers (6),

and new self-locking nuts (7) on

container frame (5).

b. Tighten self-locking nuts (7) until

flush with end of mount bolt (8).

c. Repeats step 23a and 23b for remaining

three mounts (4).

USING 1/2-1NCH DRIVE TORQUE

WRENCH, TORQUE 16 SELF-LOCKING

NUTS (7) TO 60-66 ft-lb(8-9 mkg).

4-542

Change

1